Saladin Class Scout Hermes Class Destroyer A clay dam was formed and filled with resin. The resin was cut vertically to make a 1/2" thick 'plate'. The plate was sanded down the the required shape to form the kits' 'neck'.

A fine line was etched into both sides of this part.

A post was turned on a lathe for the Deflector Dish mount.

A small spike was made, aligned, and attached to the post.

The assembled Deflector Mount slides into the hole in the bottom of the saucer...

...And snaps into place!

The copyright is applied to the top of the completed neck part.

All Scout kit parts. Aft vents Filler plug for nacelle pylon connection socket Neck Deflector Mount Post

Main Page / Modeling Links

Contact us: info@ThomasModels.com